Outage Center

ED2 has been providing reliable, local, responsive electric service to Pinal County for over 80 years. Even so, there are occasions when electricity is not available to some customers.

The moment an outage is reported, teams of ED2 experts go into action—day or night, weekday or weekend. Our crews are on call 24-hours-a-day, 365-days-a-year, and we’re proud of their fast and effective emergency response. If you experience an outage, you can be sure we will restore your power as quickly as possible.

Report an Outage


Outage Preparation and Information

ED2 has been providing reliable, local, responsive electric service to Pinal County for over 80 years. Even so, there are occasions when electricity is not available to some customers. Here are some of the common causes of outages.

  • High winds
  • Heavy rain
  • Lightning
  • Cars hitting poles
  • Fallen trees
  • Equipment failures

The moment an outage is reported, teams of ED2 experts go into action—day or night, weekday or weekend. Our crews are on call 24-hours-a-day, 365-days-a-year, and we’re proud of their fast and effective emergency response. If you experience an outage, you can be sure we will restore your power as quickly as possible.

At ED2, we work hard to provide safe and reliable electricity. However, despite our best efforts, power outages can still occur. Here’s what to do on those rare occasions when the electricity goes off.

  1. Check with neighbors. If your home is the only one without power, it’s most likely a problem with your electric service. Check the breaker box or call an electrician*.
  2. If the neighbors are out of power, it is likely a problem with the electric distribution system in your area. Call ED2 at 520-723-7741 or 800-668-8079 after hours. Call volume may be high, so your call could take a few minutes to get through. Please be prepared to provide your name, address, phone number, how long the power has been off, and (if possible) your ED2 account number.
  3. Turn off the air conditioner, stove, clothes dryer, pool pump and water heater. Unplug computers, stereos and TVs.
  4. Leave a light on so you know when power is restored.
  5. When the power comes on wait 5-10 minutes before turning on the air conditioner and other appliances. This will prevent overloading the system and may avoid another outage
  1. If all the power is off check the main breaker, if you feel competent doing so. First turn off all major appliances and most lights. Leave one light on so you can see when power is restored.
  2. Push the main breaker all the way to the “off” position, then all the way to the “on” position. It may take a considerable amount of force to move that breaker, so push hard.
  3. If this restores power to some of the house, continue the same process with all the smaller breakers until all the power is restored.
  4. If the power goes out again, call an electrician to correct the problem. Older homes may have fuses instead of circuit breakers. Some fuses have exposed terminals that can deliver a shock when touched. If you are not comfortable with changing fuses, call an electrician for assistance.*
  5. *If you would like the name of a licensed electrician, call the Arizona Electric Council at 602-277-3736.
  1. First, turn off lamps and appliances in use when the circuit goes out.
  2. Make sure your hands are dry and you are standing on a dry surface. Identify the breaker switch that is in (or toward) the “off” position. Turn it all the way to “off” and then to the “on” position.
  3. If the breaker tripped because there is something wrong with an appliance, be sure to have the necessary repairs made before using the appliance again.
  4. ED2 owns, and is responsible for electrical wiring up to and including your meter. You are responsible for the wiring beginning with your circuit breaker panel and continuing throughout your home. If wiring repairs are needed within your home, we recommend calling a licensed electrician.

Outages seldom last more than a few hours. However, there are exceptions and it’s best to be prepared.

  1. If you have electrically operated medical equipment, inquire about registering at 520-723-7741. This alerts ED2 to your needs.
  2. Plan for a place to stay in the event of an extended outage. It should be out of your neighborhood as it is likely that all power in your area will be out at the same time.
  3. Keep flashlights and extra batteries handy, and be sure everyone knows where they are located. Use your car or battery powered radio to keep up to date with the news and the progress being made in restoring the power.
  4. Know how to open the garage door without using the electric opener.
  5. Keep a supply of water, nonperishable foods and a manual can opener handy.
  1. Never use electrical equipment or tools near a pool or other wet areas.
  2. Look up. Be aware of overhead power lines. Always look up for the location of power lines when carrying or setting up a ladder or using a long-handled pool-cleaning tool.
  3. Call before digging. If you are beginning an outdoor project where digging is required, make certain you first determined the location of all underground facilities before you dig. Call the Blue Stake Center at 1-800-STAKE-IT (1-800-782-5348) state-wide at least two working days before you dig. The service is free.
  4. Have help installing antennas. Antennas can be installed safely if you follow the manufacturer’s instructions and use common sense. However, never get yourself, tools, materials and/or equipment closer than 10 feet from any overhead power lines.
  5. Fly kites and model airplanes in open areas well away from trees and power lines. Never use any metallic material in your kite.
  6. Inspect power tools and electric lawn mowers for frayed power cords, broken plugs and cracked or broken housings. If the product is damaged, stop using it and have it repaired immediately. All tools should be unplugged when not in use and stored in dry areas.
  7. Use caution when trimming trees. Before attempting any tree pruning, look for overhead power lines that may be near and/or hidden by the tree foliage. If there are any concerns with overhead power lines and trees on your property contact ED2 prior to attempting any tree work.
  8. Do not plant vegetation or construct any permanent structures directly in front of underground electrical equipment devices. Not only are there numerous underground facilities located by these devices, ED2 employees need safe access to work on these devices during unplanned outages and routine maintenance.
  9. Never use electric-powered mowers on wet grass. Use an extension cord designed for outdoor use and rated for the power needs of your mower.
  10. Treat all electric lines with caution and respect. Even low-voltage electric lines and cords can be hazardous if damaged or improperly handled.

How We Restore Power

When a major storm disrupts service to a large number of customers, our first concern is safety. ED2 has a very specific plan to restore electric service to our customers.

During storm restoration, facilities that are essential to the health and welfare of the community are given priority. These facilities include:

  • Hospitals
  • Health Care Providers
  • Police
  • Fire
  • News Media

After service is restored to priority customers, our strategy is to do whatever it takes to restore the most people’s power back on the quickest. When making a decision on where power should be restored first, we look at the amount of customers that are affected by the outage. If we have a choice to restore 2,000 customers, or 100 customers, we would first work to get the 2,000 customers up and running.

There are other factors that can impact the time of power restoration: weather conditions, accessibility to damaged areas, time of day, and environmental issues. Since these factors can impact outages differently, it can be difficult to predict restoration times.